Descripción
New DTM-OU remote control super reduced size.
433.92 MHz frequency and a single button.
It can be programmed for Fixed Code or Rolling Code or both.
CR2032 battery.
As a technical new, it incorporates a novel function that allows up to 3 doors to be activated with a single button.
For example one press for door 1, two presses for door 2 and three presses for door 3.
This function is programmed with our FUTURE PLUS or FUTURE NOVA.
With three rear holes in the case, there is no need to open the case for programming. Simply plug the probe into the back of the remote control, giving you access to the internal connector for easy programming.
Although this new remote control has been optimized for the 433.92 MHz frequency, through the programming machine, it can be programmed for lower frequencies. At those frequencies, in most cases, the range will be poor, but in many receptors it will work with an acceptable range.
The measurements of this new remote control are 37 mm X 37 mm X 5 mm.
NOTE: THIS REMOTE IS EXCLUSIVELY INTENDED FOR PROFESSIONALS. TECHNICAL KNOWLEDGE AND EQUIPMENT ARE REQUIRED FOR ITS PROGRAMMING, FOR EXAMPLE FUTURE NOVA.
