FUTURE NOVA remote control programmer

Descripción

Future Nova garage remote control programmer.

CLICK HERE TO SEE FEBRUARY 2021 UPDATE WITH IMPORTANT CHANGES

This programmer allows you to identify, program, generate, save and duplicate garage remote controls. Identifies the type of remote control and its frequency from the received transmission. You can save that frequency and code of the analyzed remote controls.

The frequency meter will display the frequency of the received signal in a range of 250 MHz to 900 MHz.

We will be able to read the content of some memories of the main receptors.

It will be possible to generate and/or duplicate fixed code or Rolling code remote controls, covering 90% of the models on the European market.

It will also be possible to duplicate remote controls with a quartz frequency between 30 MHz and 40 MHz, even if it is not shown on the screen.

It has a 5-inch screen where we can see the results of the identification and duplication.

It is a simple but very versatile device that will help us in the process of identifying and duplicating remote controls. Each screen will guide us in the next step of the process.

It is delivered with a transport case with the following content:

• FUTURE NOVA machine.
• Canvas briefcase.
• HDMI programming cable.
• USB power cable.
• USB/220V wall plug
• Power bank for portable power (external battery).
• 3-pin P3 programming connector.
• 5-pin P5 programming connector.
• Ceramic screwdriver.
• Star screwdriver.
• 3 and 5 pin adapter connectors.

With its comfortable and intuitive arrows, we can move through the different screens, to choose which function we want to use at each moment, both to analyze a signal and to duplicate a remote control.

Being provided with a standardized 5V power supply system and a USB connector, this will allow us to use our FUTURE NOVA both from a 220V plug, its own power bank, feeding it with the PC or with the car charger/cigarette lighter.

With this programming machine, we will be able to identify the vast majority of original remote controls and copies on the market.

We can duplicate them and host their signal in the following DETUMANDO models:

DTM-2/433, DTM-2/868, DTM-H6, DTM-HUGO, DTM-LOGO, DTM-Q, DTM-MV, DTM-MV123, DTM-ROLL/433, DTM-ROLL/868, DTM- OU both old and new models.

PROGRAMMING INSTRUCTIONS