DTM-V4 2 Buttons Remote Control

10,75 IVA NO incluido

DTM-V4 remote control compatible with V2 Electtronica, Handy and Phoenix.

wws Detumando Estamos aquí para ayudarte! Consúltanos!

Descripción

Programmable DTM-V4 remote control compatible with V2 Electtronica, Handy and Phoenix.

RF PLUS or FUTURE PLUS programmer is required.

DTM-V4 Programming Instructions

1. Connect the three pins of the RF-Plus or FUTURE PLUS to the DTM-V4 remote control.

2. Transmit with the V2 remote for the first time

3. The DTM-V4 remote control indicates that it has received this first code with a blink.

4. Transmit with the V2 remote control a second time (one second press with the same button as step 2).

5. The DTM-V4 remote control tells us that it has received this second code with two flashes.

6. Transmit with the V2 remote control a third time. (one second press with the same button as step 2).

7. The DTM-V4 remote control tells us that it has received this third code with three flashes.

8. Transmit with the V2 remote control for the fourth time.

9. The DTM-V4 remote control tells us that it has received this fourth code with four flashes.

10. Transmit with the V2 remote control for the fifht and one last time. (one second press with the same button as step 2).

11. The DTM-V4 remote control tells us that it has received this last and fifth code with five flashes.

12. Programming is complete, please turn off the DTM-V4.

NOTE: THIS REMOTE IS EXCLUSIVELY INTENDED FOR PROFESSIONALS. TECHNICAL KNOWLEDGE AND EQUIPMENT ARE REQUIRED FOR PROGRAMMING AS THE FUTURE NOVA.

Información adicional

Peso0,015 kg
Dimensiones5,2 × 3,8 × 1,4 cm
Detumando
X