DTM-MV 2 Buttons Remote Control

10,75 IVA NO incluido

This DTM-Q remote control can copy low frequency remote controls from 26 MHz to 40 MHz

wws Detumando Estamos aqu├ş para ayudarte! Cons├║ltanos!

Description

PROGRAMMABLE DTM-MV REMOTE CONTROL

PRODUCT DESCRIPTION

This 433.92 MHz frequency DTM-MV remote control has been developed to operate automations, open and close garage doors, lock and unlock tobacco machines. Receptors can be installed in a multitude of equipment such as blinds, dangerous machines or lighting and activated with these controls. It has 2 or 4 channels or buttons, which are intended to be functional as compatible with receptors of the brands: CLEMSA MASTERCODE with or without installer code.

It must be programmed with our RF PLUS, AITEC PROGRAMMER, RF DISPLAY TESTER or FUTURE PLUS.

 

PROGRAMMING

To program our DTM-MV remote control, we will follow the next steps:

1.- Connect the pin probe to the remote control.

2.- At that moment the light of the destination remote control will turn on, turning off after a few seconds.

3.- When the DTM-MV led turns off, we will start emitting with the Mastercode or the compatible remote control.

4.- When the DTM-MV is blinking, it means that the duplication has been done.

Note: Remember that you have to place the microswitches of the code for a correct work.

NOTE: THIS REMOTE IS EXCLUSIVELY INTENDED FOR PROFESSIONALS. TECHNICAL KNOWLEDGE AND EQUIPMENT ARE REQUIRED FOR PROGRAMMING AS THE FUTURE NOVA.

Additional information

Weight0,015 kg
Dimensions5,2 × 3,8 × 1,4 cm
Detumando
X
WeCreativez WhatsApp Support
Estamos aqu├ş para solucionar cualquiera de las dudas que tengas, preg├║ntanos!
Hola, puedo ayudarte en algo?