Descripción
The 868 MHz frequency DTM-2/868 programmable remote control has been developed to operate automations, open and close garage doors, lock and unlock tobacco machines. Receptors can be installed in a multitude of equipment such as blinds, dangerous machines or lighting and activated with these controls. It has 2 or 4 channels or buttons, which are intended to be functional and compatible with receptors of the following brands: FACC, CELINSA, NICE, ROLLTORE, BFT, JCM, CLEMSA, CELINSA, V2, DEA SYSTEM, HORMANN, BELSON , CAME, CARDIN, GIBIDI, MATICDOOR, TELCOMA, VELLEMAN, PUJOL, ERREKA, FORSA, KAMAR, MX-ONDA, LIFT MASTER, GENIE and with practically 90% of fixed code remote controls on the market.
PROGRAMMING
It must be programmed with our RF PLUS, RF DISPLAY TESTER, AITEC PROGRAMMER, FUTURE PLUS.
To program our DTM-2 remote control with any of the brands mentioned, we will follow these steps:
1.- Connect the three-pin probe to the destination remote control as indicates in Fig. A.
2.- Having the remote control to be copied already placed on top of the duplicating machine, on the TEST AREA, we will press the button in which we want to store the code on the destination remote control; The light of this remote control will come on intermittently, turning off after three flashes.
3.- Immediately we begin to transmit with the original remote control on the machine until the light of the destination remote control flashes. It is recommended to do steps 2 and 3 as quickly as possible. If the original remote control had several buttons, we will repeat the hole process for each button, disconnecting and connecting the probe between each programming.
Programmable DTM-2/868 remote control
NOTE: THIS REMOTE IS EXCLUSIVELY INTENDED FOR PROFESSIONALS. TECHNICAL KNOWLEDGE AND EQUIPMENT ARE REQUIRED FOR PROGRAMMING AS THE FUTURE NOVA.
